SPX2000 Professional Multi-Effect Processor

		SPX2000
Outline
I/O	Line inputs	2
I/O	Digital I/O	1x AES/EBU (2-in/2-out)
Ngoại tuyến
I/O	Bộ chuyển đổi AD	24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
	Ngõ ra đường dây	2
	Bộ chuyển đổi DA	24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
Thông số kỹ thuật chung
Xử lý bên trong		32bit
General specifications
Sampling frequency rate	Internal	44.1kHz, 48kHz, 88.2kHz, 96kHz
Sampling frequency rate	External	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay		Less than 426 micro sec
Total harmonic distortion		Less than 0.05% (20Hz-40kHz)
Frequency response		0, +1, -3dB 20Hz-40kHz
Dynamic range		AD+DA: 106dB
Hum & noise level	Residual output noise	-80dBu
Crosstalk		-80 dB
Power requirements		Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
General specifications		25W
Dimensions	W	480mm; 18-7/8in
	H	45mm; 1-3/4in (1U)
	D	372.5mm; 14-5/8in
Net weight		4kg; 8.8lbs
Accessories		Owner’s manual, AC power cord

Analog input and output characteristics

Terminal	LEVEL SW	Impedance	For use with nominal	Level		Connector
Terminal	LEVEL SW	Impedance	For use with nominal	Nominal	Max. before clip	Connector
INPUT [L,R]	+4dBu	10kohms	600ohm Lines	+4dBu	+24dBu	XLR-3-31 type TRS phone jack (Balanced)
INPUT [L,R]	-10dBu	10kohms	600ohm Lines	-10dBu	+10dBu	XLR-3-31 type TRS phone jack (Balanced)
OUTPUT [L,R]	+4dBu	75ohms	600ohm Lines	+4dBu	+24dBu	XLR-3-32 TRS phone jack
OUTPUT [L,R]	-10dBu	75ohms	600ohm Lines	-10dBu	+10dBu	XLR-3-32 TRS phone jack

Terminal	Format	Data length	Level	Connector
AES/EBU (IN)	AES/EBU	24bit	RS422	XLR-3-31 type (Balanced)
AES/EBU (OUT)	AES/EBU	24bit	RS422	XLR-3-32 type (Balanced)

Terminal		Format	Level	Connector
TO HOST	USB	USB 1.1	0 to 3.3V	B type USB Connector
MIDI	IN	MIDI	-	DIN Connector 5P
MIDI	OUT/THRU	MIDI	-	DIN Connector 5P
WORD CLOCK	IN	-	TTL/75ohms	BNC Connector