Tải xuống
-
Dữ liệu kỹ thuật của dòng SWP2
Các trang online trực tuyến giải thích chi tiết về những chức năng cơ bản và giao diện người dùng Web của SWP2.
Tự học
Audio Networking
Hỏi đáp
-
What is the maximum number of fiber ports available?
-
Can single-mode fiber modules be installed?
-
What does the “STATUS” LED mode show?
-
What does the “VLAN” LED mode show?
-
What is the CONSOLE RJ45 connector used for?
-
What is the specification for the back-up external DC input?
-
I cannot initialize SWP2 even if I turn on the SWP2 power while holding down the LED MODE button.
-
Do you have the SWP2 without fiber port?
-
Can I connect the SWP2 and SWP1 via the fiber ports?
-
What kind of cable should I use for the SWP2's fiber ports? And how long can I wire the cable when using the SWP2's fiber ports?
-
What is the difference between the “DANTE” and “USER” Config modes?
-
Does the “Normal” VLAN Preset use VLAN 1 for every port?
-
How many VLANs are supported by the switch?
-
Can any of the RJ45 ports be used as a “Trunk”, or only the fiber ports?
-
Can 2 cables be used between a pair of switches to provide a doubled network bandwidth and a redundant connection?
-
How can a user modify the switch settings, program VLANs etc?
-
How can I use Spanning Tree for a redundant ring network?
-
Can the SWP2 and SWP1 be used in combination with other makes of switch?
-
Does the switch support EEE (“Energy Efficient Ethernet”)?
-
Does the switch support QoS with DSCP?
-
Does the switch provide IGMP Snooping (V3) for filtering multicast traffic?
-
Can the switch be the IGMP Querier?
-
Does the switch protect against network loops?
-
Does the switch have a static IP address for management purposes?
-
Can the SWP2 and SWP1 act as a DHCP server?
-
What security settings does the switch have?
-
Are there any extra security functions to protect additional devices being added to the network?
-
Which switches can be used with this software?
-
How does the software discover the switches in the network?
-
Can the software be used to configure switch settings?
-
Can each switch be given a name for easy recognition?
-
Can USER switch config settings be saved and loaded into other switches of the same type?
-
Can any programming or editing be made off-line?
-
Can the software be used to edit settings in Dante devices?
-
Can a log file be saved for trouble-shooting purpose?
-
Why do some Dante devices have 2 different MAC addresses and register 2 times in the “Connected Devices” list?
-
What is the “Snapshots” function used for?
-
MCP1 controllers do not appear in the “Connected Devices” list.
-
What is the initial user name and password for logging in to the switch via Web GUI?
-
When I start the switch in Dante mode after I changed "each server setting" via Web GUI and turned off the switch, "each server setting" do not return to the initial settings. Is this behavior by design?
-
Why is the Web GUI sometimes not able to change the VLAN settings of specific ports?
-
The SWP1 does not maintain the clock time during power-off, therefore the day and time setting will be initialized whenever it is restarted. How about the SWP2?
-
What is the RADIUS server function?
-
What other authentication methods can be used with the RADIUS server function?
-
Which port can be connected to use the authentication function?
-
How can a system with multiple switches be configured?
-
Can the RADIUS server function be used with one switch?
-
Which switches support the RADIUS server function?
